Home Back

Steel Coil Length Calculator

Steel Coil Length Formula:

\[ Length = \frac{Weight}{Width \times Thickness \times Density} \]

kg
m
m
kg/m³

Unit Converter ▲

Unit Converter ▼

From: To:

1. What is a Steel Coil Length Calculator?

Definition: This calculator estimates the length of a steel coil based on its weight, width, thickness, and material density.

Purpose: It helps metal workers, engineers, and manufacturers determine how much material they have in coil form.

2. How Does the Calculator Work?

The calculator uses the formula:

\[ Length = \frac{Weight}{Width \times Thickness \times Density} \]

Where:

Explanation: The formula calculates how long the steel would be if uncoiled based on its mass and cross-sectional area.

3. Importance of Steel Coil Length Calculation

Details: Accurate length calculation helps in production planning, inventory management, and cost estimation for steel products.

4. Using the Calculator

Tips: Enter the coil weight in kg, strip width in meters, thickness in meters, and material density (default 7850 kg/m³ for steel). All values must be > 0.

5. Frequently Asked Questions (FAQ)

Q1: What's the standard density for steel?
A: The default density is 7850 kg/m³ for carbon steel. Use 8000 kg/m³ for tool steel or 2700 kg/m³ for aluminum.

Q2: How precise should thickness measurements be?
A: Steel thickness is typically measured in millimeters or fractions of millimeters, so use 4 decimal places for meters (e.g., 0.0012 for 1.2mm).

Q3: Can I use this for other metals?
A: Yes, just change the density value to match your material (e.g., 2700 for aluminum, 8940 for copper).

Q4: Why is width important in the calculation?
A: Width determines the cross-sectional area of the steel strip along with thickness, which affects how much length corresponds to a given weight.

Q5: How accurate is this calculation?
A: It provides theoretical length. Actual length may vary slightly due to coil tension, surface finish, and measurement tolerances.

Steel Coil Length Calculator© - All Rights Reserved 2025