1,500 watt inverter cable size
A 1,500 W inverter draws about 147 A from a 12 V battery at full output, 74 A at 24 V and 37 A at 48 V. Here is the cable and fuse for each.
Battery cable
Fill in the circuit, then press the button.
1,500 W inverter cable chart
| Battery | Input current | Fuse | 3 ft | 5 ft | 10 ft |
|---|---|---|---|---|---|
| 12 V | 147 A | 200 A | 2/0 AWG | 2/0 AWG | 2/0 AWG |
| 24 V | 74 A | 100 A | 4 AWG | 4 AWG | 4 AWG |
| 48 V | 37 A | 50 A | 8 AWG | 8 AWG | 8 AWG |
85% efficiency at nominal battery voltage. Copper, 90 °C ampacity at 125% of input current, 3% drop, one-way length. A battery near cutoff draws about 14% more.
Choosing the system voltage
Above about 2,000 W, 12 V cables become heavy and expensive and the connections run warm. At 1,500 W, 12 V is still workable with short cables. Surge ratings, often twice the continuous rating for a few seconds, are covered by the fuse's time delay rather than the cable.
Common questions
What size fuse for a 1500 W inverter on 12 V?
About 200 A, which is 125% of the 147 A full-load input current. Check the inverter manual for its maximum.
Can I use 4 AWG for a 1500 W inverter?
4 AWG copper is rated 95 A at 90 °C. At 12 V the inverter needs about 184 A of ampacity, so 4 AWG is too small; it works only at 24 V or 48 V where the current is lower.
Related calculators
Sources
- NFPA 70, National Electrical Code, 2023 edition (https://www.nfpa.org/codes-and-standards/nfpa-70-standard-development/70)
- ABYC E-11, AC and DC Electrical Systems on Boats (https://abycinc.org/)