Voltage Drop Calculator

Home

Voltage drop calculators

Start with the general calculator on this page, or pick one set up for your system voltage or application.

V
A
One way, from the source to the load.
°C
%
75 °C is the NEC basis for loaded building wire. Use 20 °C for room temperature. 3% is the NEC guideline for one circuit.

Voltage drop

Fill in the circuit, then press the button.

Conductor materials

Copper and aluminum in standard building sizes use NEC Table 8. Silver, gold, tungsten, iron, platinum and steel, and any odd or fine gauge, are figured from resistivity and cross-section, then corrected for temperature.

MaterialResistivity at 20 °CTemperature coefficientDrop compared with copper
Silver1.59 × 10⁻⁸ Ω·m0.0038 per °C0.92×
Copper1.72 × 10⁻⁸ Ω·m0.0039 per °C1.00×
Gold2.44 × 10⁻⁸ Ω·m0.0034 per °C1.42×
Aluminum2.65 × 10⁻⁸ Ω·m0.0040 per °C1.54×
Tungsten5.60 × 10⁻⁸ Ω·m0.0045 per °C3.26×
Iron9.71 × 10⁻⁸ Ω·m0.0050 per °C5.65×
Platinum10.60 × 10⁻⁸ Ω·m0.0039 per °C6.16×
Steel20.00 × 10⁻⁸ Ω·m0.0030 per °C11.63×

Typical handbook values for the pure metals. Iron and steel vary widely by alloy.

Sources

  • NFPA 70, National Electrical Code, 2023 edition (https://www.nfpa.org/codes-and-standards/nfpa-70-standard-development/70)
  • ASTM B258, Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires