Voltage Drop Calculator

HomeVoltage drop

Landscape lighting voltage drop calculator

Low-voltage landscape lights on 12 or 14 gauge cable lose voltage fast. Enter the total fixture watts, the run and the cable to see the voltage at the last fixture for each transformer tap.

V
W
From the transformer to the last fixture.

Voltage at the last fixture

Fill in the circuit, then press the button.

Watts and distance per cable size

Longest run to a cluster of fixtures before the drop reaches 1.5 V on a 12 V tap:

Fixture watts16 AWG14 AWG12 AWG10 AWG
20 W90 ft143 ft227 ft362 ft
40 W45 ft71 ft113 ft181 ft
60 W30 ft47 ft75 ft120 ft
100 W18 ft28 ft45 ft72 ft
150 W12 ft19 ft30 ft48 ft
200 W9 ft14 ft22 ft36 ft

Layouts that reduce drop

  • Hub: run one cable to a central junction and branch out to fixtures at equal distances.
  • Split loads: two runs of 100 W drop half as much each as one run of 200 W.
  • Higher tap: multi-tap transformers offer 13, 14 and 15 V taps to make up for loss on long runs.
  • Heavier cable: 10 AWG drops 40% less than 12 AWG.

Burial depth for these circuits is 6 in under NEC Table 300.5. See the burial depth calculator.

Common questions

What voltage should landscape lights get?

Check the fixture label. Many LED landscape fixtures accept a wide input range, while halogen lamps want close to 12 V. Measure at the last fixture under load.

Do LED fixtures still need voltage drop calculations?

Less often, because they draw a fraction of halogen's current. Long runs of many fixtures still benefit from the check.

Sources

  • NFPA 70, National Electrical Code, 2023 edition (https://www.nfpa.org/codes-and-standards/nfpa-70-standard-development/70)