2,000 watt inverter cable size
A 2,000 W inverter draws about 196 A from a 12 V battery at full output, 98 A at 24 V and 49 A at 48 V. Here is the cable and fuse for each.
Battery cable
Fill in the circuit, then press the button.
2,000 W inverter cable chart
| Battery | Input current | Fuse | 3 ft | 5 ft | 10 ft |
|---|---|---|---|---|---|
| 12 V | 196 A | 250 A | 4/0 AWG | 4/0 AWG | 4/0 AWG |
| 24 V | 98 A | 125 A | 2 AWG | 2 AWG | 2 AWG |
| 48 V | 49 A | 70 A | 6 AWG | 6 AWG | 6 AWG |
85% efficiency at nominal battery voltage. Copper, 90 °C ampacity at 125% of input current, 3% drop, one-way length. A battery near cutoff draws about 14% more.
Choosing the system voltage
Above about 2,000 W, 12 V cables become heavy and expensive and the connections run warm. At 2,000 W, 24 V or 48 V cuts the current to a half or a quarter and the cable by several sizes. Surge ratings, often twice the continuous rating for a few seconds, are covered by the fuse's time delay rather than the cable.
Common questions
What size fuse for a 2000 W inverter on 12 V?
About 250 A, which is 125% of the 196 A full-load input current. Check the inverter manual for its maximum.
Can I use 4 AWG for a 2000 W inverter?
4 AWG copper is rated 95 A at 90 °C. At 12 V the inverter needs about 245 A of ampacity, so 4 AWG works only at 48 V.
Related calculators
Sources
- NFPA 70, National Electrical Code, 2023 edition (https://www.nfpa.org/codes-and-standards/nfpa-70-standard-development/70)
- ABYC E-11, AC and DC Electrical Systems on Boats (https://abycinc.org/)