Voltage Drop Calculator

HomeDC & solar

200 watt solar panel wire size

A typical 200 W panel lists about Isc 11.5 A, Vmp 20.5 V. Your panel's label may differ, so the calculator uses whatever you enter.

A
A
V
One way, from the source to the load.
Most installers aim for 2% or less on PV source circuits.
%

PV wire

Fill in the circuit, then press the button.

200 W panel wiring options

LayoutVoltageCurrentAmpacity needed
1 in series × 1 parallel20 V9.8 A18.0 A
2 in series × 1 parallel41 V9.8 A18.0 A
4 in series × 1 parallel82 V9.8 A18.0 A
1 in series × 2 parallel20 V19.6 A35.9 A
2 in series × 2 parallel41 V19.6 A35.9 A
1 in series × 4 parallel20 V39.2 A71.9 A

Max distance for one string at 2%

Wire1 panel2 in series4 in series
14 AWG6 ft13 ft26 ft
12 AWG10 ft21 ft42 ft
10 AWG16 ft33 ft67 ft
8 AWG26 ft53 ft107 ft
6 AWG42 ft85 ft170 ft

Copper, at Vmp and Imp, one way.

Common questions

Series or parallel?

Series raises voltage and keeps current low, so the wire can be smaller and run farther. Use parallel when shading is a problem or the charge controller's input voltage limit is low.

Sources

  • NFPA 70, National Electrical Code, 2023 edition (https://www.nfpa.org/codes-and-standards/nfpa-70-standard-development/70)
  • https://www.nrel.gov/pv/