Voltage Drop Calculator

HomeDC & solar

Trailer wiring gauge

Trailer lights draw little, but electric brakes and charge lines carry real current over 20 to 40 ft. Enter the circuit current and the length from the tow vehicle plug.

V
A
One way, from the source to the load.
3% for a branch circuit or feeder is the NEC informational guideline.
%

Voltage drop

Fill in the circuit, then press the button.

Common trailer circuits

CircuitTypical currentGauge, 30 ft one way
Running and turn lights, LED1–3 A14 AWG
Electric brakes, 2 axles12–15 A6 AWG
Electric brakes, 3 axles18–22 A4 AWG
12 V charge line20–30 A4 AWG
Ground returnsum of allsame as the largest circuit

5% drop, copper.

Brake current

Each 10–12 in brake magnet draws about 3 A at full output, so a tandem axle with four magnets draws about 12 A. Brake controllers need full voltage to deliver full stopping force.

Common questions

What gauge for a 7-way trailer plug?

Many 7-way cables use 10 or 12 AWG for brakes, charge and ground, and 14 to 16 AWG for lights.